Use the TP-Link Wi-Fi router to increase the range of your home network. The TP-Link router is reliable to use and simple to use. It can fulfill your all required Wi-Fi needs that you expect from a networking device. The TP Link setup is easy and simple via You can sign in to the tp link admin page through In this article, we will guide you on setup. Go through the article to know more. Positioning the router at the right location is very important. Before you proceed, keep the below steps in your mind:

What is an optimal location to place the TP-Link Router?

tplink router

How to install the TP-Link Router?

Before you start the setup, you need to perform the login process. For this, you have to connect the TP-Link router to your computer. There are two ways to connect to the router’s network:

a) Wired Connection
b) Wireless Connection

Log into the setup page

We are going to use the wired connection to connect your router to the computer. Follow the below steps to access the tp link admin page:

Configure the TP-Link Router Settings

It is easy to configure the TP-Link router using the quick setup wizard. The smart wizard will walk you through the TP Link setup process:

How to troubleshoot ‘ not working’ error?

There might be various reasons for this issue. Follow the below steps to resolve this error:

How to reset the TP-Link Wi-Fi Router?

Look for the reset button and long press the reset button. Hold the button with a paper clip until the LED starts to blink. Release the button when the LED becomes solid. Your TP-Link router has been reset to the factory defaults. Now, set up or configure the TP-Link router again. This was all about the TP Link setup process. If you face any issue or have any queries related to the TP-Link router, contact us now. We have a group of technicians who are experts in troubleshooting all the router related problems. To contact us, dial our toll-free no or do a live chat via a live chat window. Setup

The more we move towards a time and age when data becomes large in size and more critical, our need for a rather stable and secure Wi-Fi connectivity increases. We need wireless equipment that can outperform the fastest of routers and blazing speeds that can securely reach across large distances with minimum data loss. This is a lot to ask for and providing this is an even bigger task in itself. To achieve that, we need a product so powerful that can get you such speeds while at the same time give you better control with multiple features and a simple setup process. While it is a lot to ask for, you can get, Giga-level like speeds and an easy and secure login method by simply logging in to TPLinkWifi net.TP-Link devices have been constantly providing new tech to the world including their infamous and extremely powerful Wi-Fi routers, powered with the latest 802.11 ac and ad standard which provide incomparable speeds, no matter where you are in the vicinity of your house or office. Ever since the turn of the century, and even before that, TP-Link devices have been constantly tailored-fit to suit the needs of the ever-advancing world. Thus the features that TP-Link devices offer are up to date with today’s technology like the USB 3.0, beamforming, powerful processor to handle traffic, MU-MIMO, and countless other. Even the TP link router price is extremely economical for its house router range. Getting a complete package like this is tough to find anywhere. Several other features in detail are given below. These include Setup

Fast Wi-Fi Speeds

The fast Wi-Fi speeds of up to 2167 Mbps in our Archer C5400 router is a testament to how fast we can take the speed. On an average though, all the new routers with 802.11 ac standards and above can offer the Giga-level speeds and provide extreme data transfers rate. Gaming, video streaming, video calling and other heavy data consuming activities will follow through extremely smooth. Advanced NitroQAMTM and 4-stream technology increases the Wi-Fi speeds on all the available bands. This wide bandwidth also allows you to connect multiple devices with minimum speed loss on either of the device.

Multiband technology

The multiband technology allows you to spread data across a wide range and at unimaginable speeds. The dual and tri-band routers will let you connect devices according to your distance and speed requirements. The 2.4 GHz band can provide data transmission to large distances at decent speeds. The 5 GHz band will allow you to transfer data at a much faster rate as compared to the 2.4GHz but compromises on the distance. The beamforming technology will let the router concentrate more on the device that is consuming extensive data to make sure it receives maximum bandwidth.

Parental Controls

As a parent what always worries us is the unlimited access that kids have. This can effectively put them in risk of being introduced or influenced by some extremely dark and explicit content that plagues every corner of the internet. As a parent you would be better off, giving the kids the access to only the websites that they need and block the rest of the internet off. Alternatively you can also block just some particular website and leave the rest untouched. All secured with the TP Link router password which only you control.

Guest Networks

You can also keep your network secured by blocking the access to the main SSID and providing the visitors to your home, access to the guest networks effectively keeping the former secured as no one gets the ability to access the TP Link Wi-Fi router login page which you can access using the page. You can allow as many as 50 Wi-Fi clients on the Guest network you created.

USB Ports

The USB ports that the TP-Link routers provide you are all lightning fast 3.0 USB ports. The USB ports will allow you to quickly transfer data from any media connected to it directly without having them attached to any multimedia device. You can stream movies, music, or videos straight to your smart TV by connecting the Flash drive to the router.

The TP Link router setup is extremely easy too. Setting up a TP-Link router is like switching on a computer. You just need the access to the TP Link router login page and you are good to go!

Before installing them however, you would be required to perform a number of steps. First things first, take your new TP-Link Wi-Fi router and using an Ethernet cable, connect the modem to the WAN or the internet port of the router. Now turn the power on the device. Connect the power adapter to the power socket, and connect the other end to the power port of the router. Install the antennas that were given along the device and you are ready to start the TP Link router setup process.

Alternatively you can also use the Tether app to configure the device which you can do without using the TP Link router IP addressTo do this, follow the steps below:

With these easy TP Link router setup steps, you can setup your device with ease. There are however always questions which can address now.

Question: How to find the default access to the TP-Link device?

Answer: If you don’t wish to access the device settings using the app, you can do that by accessing the web-based setup page of the router. This page will let you manage all the intricate details of your device. Every product comes with the default access information printed on it. To find the web access you can do the following:

  • It is written on the label on the back of the device. It would say something like this: “Default Access; Default Settings; Default Wireless Access”.
  • The quick installation guide also has this IP and web address.

After locating the web access IP or web address simply login into it by using the default password if you haven’t changed it when you last login to the device.

Question: What should I do if I can’t access the internet?

Answer: To check why you don’t have access to the internet, perform the following checks:

  • Check to see if the internet is currently active or not. To do this, simply access the internet via the Modem router. Plug in your wired device into the modem using an Ethernet cable. If you still don’t have access to the internet, connect your ISP.
  • Open the setup page using the IP or the address  and re-complete the setup process.
  • Reset you router and try again.
  • Reset the device back to default factory setting and set up the device again.