How do I Secure My Network?

Wireless networking has made it easy for anyone to use internet on mobile, devices, tablets, laptops, computer devices and other wireless devices anywhere in the house without using the cluster of cables. Those days are gone when you just had to install a firewall and your network was saved. Today’s hackers are much more advanced that’s why just installing a firewall is not enough. The hackers can get into your network without setting foot inside your house because the wireless network is much more open. Therefore, it is very important to secure the network of your wifi.

Securing your network is a lot more than just setting a password. The enhanced security measures can go a long way to secure the network. It is not very hard to secure the network that can prevent hackers from taking control of your computer and also prevents others from stealing your network. Here are some few easy measures which you should adopt in order to secure your wireless network.

Access the settings page of your router

setting-page

It is very important for you to know how to access the settings of your wireless router. Normally, you just have to type 192.168.1.1 into the address bar of your web browser and then enter the default username and password of your router.

Note: You can find the credentials of your routers by searching it on Google in case you have lost the printed manual that came with your router.

Unique password for your router

The first thing you should do once you are logged in to your router is to change the default password of your wireless router to something more secure and advanced. To change the password, you have to do it from the administrative setting of your router’s settings page.

Use an unsuspicious network SSID name:

The wireless network name (SSID) of the router is usually ‘default’ or the brand name of the router. Changing the network name will obviously make your network more secure. To change the network name, you have to go to the wireless settings.

Encrypt using WPA2:

The network encryption is also used to secure the network. The several encryption methods are WEP, WPA and WPA2. Choose WPA2 as it is the strongest encryption. Open the wireless security settings and enable the encryption on your wireless network.

Filter MAC address:

Add the MAC addresses of all the devices you want to be connected with your wireless router so that only specific devices can connect to your wifi network. Add the MAC address of your devices and add them to MAC address filtering in the router’s administrating settings.

The Range of your wireless signal:

You can reduce the range of your network by changing the mode to 802.11g instead of 802.11n or use a different wireless channel.

Latest router’s firmware:

To secure the network of your wireless router it is very important to upgrade its firmware. Check the website of your router’s manufacturer for firmware updates of your router.

There are many other security options that can secure the network but these measures are easy to implement and won’t cost much in terms of your money and time. By adopting these measures you will have big security payoffs and will be able to sleep better at night. If you face any issues while adopting these measures in order to secure your network then you can contact our team of technical experts. You can call them on the toll-free number which is accessible 24*7 or you can also mail them your query related to your router.

Connections drop at random times

As you have searched for the keyword “Connection drop at random times” so we are going to teach you some troubleshooting tips that should get your Internet connection back and running because we all know how irritating it can be if your wifi keeps dropping.With all the physical barriers such as architectural interference, metal appliances etc. may affect the strength of the wireless signal and create a bad impact on the existing wifi network. There often seems to be no reason behind the weak internet connection randomly drops for a few seconds. However, there could be several possible reasons why your wifi Connection drop at random times. If your internet connection keeps dropping and reconnecting, you are not alone. Intermittent wifi connection is frustrating, but it’s usually possible to fix the issue.

Here are some steps that you can try to get your internet connection stable again. Just go through the complete list until your problem is resolved.

  1. Insufficient Wi-Fi Network Range:

You might be suffering from an intermittent wifi connection if your router is placed in a closet, stuck in the corner of your basement, simply old or broken. If your router is placed far away then you’ll notice the Wi-Fi Connection drop at random times. One of the great solutions is moving closer to the router or moving the router closer to you. If still, your Wi-Fi is not stable then restart your router and see the status of the Internet. Another option to improve the wifi network range is wifi range extender. Click the link https://www.wicommfi.com/ to get more information about the Wireless Range Extender.

  1. Radio Signal Interference:

If you notice that your internet connection keeps dropping and reconnecting when you are right next to the microwave or another electronic device then chances are that your router’s wifi signals might be interfering with the radio signals transmitted by various consumer electronic products. You can change some Wi-Fi radio settings to avoid this problem.

  1. The Network congestion:

The most common causes for the error “Connection drop at random times” are a number of networks that are using the same channel. When multiple networks overlap, it can slow down the performance of wifi connection adversely and the Internet connection randomly drops for a few seconds. However, you can solve the “wifi keeps dropping” problem by manually switching to a less crowded channel or one that is not used by any other networks currently.

  1. Outdated Firmware or Missing Driver:

Another reason for the intermittent wifi connection is your wireless router and network card. The wifi router and computer’s network driver become corrupted or obsolete over time and cause network drops and other wireless problems. You should update the firmware of your router if you are using an old router. Also, consider updating your computer’s network driver.

  1. Reinstall the software or Reset Wireless Router:

If the problem still persists then reset your router by inserting a pin in a little hole at the back of the wifi router and hold it down for about 10-20 seconds. After resetting your wifi router, restart your PC and modem and try to connect to the wifi. If you are confident that the problem is not with the hardware or your ISP but with the software then you should try to reinstall or upgrade the software of your PC.

We hope after reading this article you would no longer wonder why your wifi Connection drop at random times. Using these few steps you can resolve all your wifi issues. If you are still facing issues, you can call our experts who have years of experience and resolve your issues fast. Simply call us at our toll-free number or chat live with us.

TP-Link AC2300 login

The given blog helps you in the quick installation process of the TP-Link smart wireless router. TP-Link routers are best suitable for your need for offices and houses. TP-Link routers giving the users best in speed are the most demanding routers. Talking about speed TP-Link AC2300 smart wireless router is best known.

Moreover, TP-Link AC2300 is simple and easy to set up. If we see its design, TP-Link powerful antennas make sure that there is regular Wi-Fi signal to all your devices. TP-Link Ac2300 smart Wi-Fi router is easy to access as it is comfortable with every main operating system.

For TP-Link AC2300 login process follows the steps given below:

  • In an ‘open an IP address automatically’ mode set up TCP/IP protocol.
  • On your browser visit http://tplinkwifi.net.
  • You will be prompted to the username and password field. Enter the default username and password.
  • Then click on ‘login’.

The TP-Link AC2300 login process is done. For more details contact us on our toll-free number.  

After the login process of your router, let us connect your router to the internet. TP-Link AC2300 has a web-based quick setup wizard which has the important information in it. Follow the given steps for TP-Link AC2300 setup process by using the Quick setup wizard

  • Open any web portal and enter http://tplinkwifi.net and log in by the default password.
  • On the top of the page, click on the ‘quick setup’ and follow the instructions.
  • Now select the connection type and then enter the default username and password and click ‘next’.
  • Under the WLAN option, you can change the SSID and the network key.

Then complete the configuration process and click ‘save’ to save your changes. The Quick setup is completed. You can also manually setup your TP-Link wireless router. Kindly follow the steps:

  • Enter http://tplinkwifi.net in any web browser. And log in using the router’s password.
  • Then under the basic option click on the internet and select the internet connection from the list.
  • Now on the router’s management page, click on ‘network’ and then ‘WAN’.
  • Change your WAN connection to PPPoe.
  • Fill the details given by your ISP. And then click on ‘save’ to save your settings.

Thus TP-Link C2300 set up manually to work with a DSL modem is done very easily. You can also call us on our toll-free number for further details. After the setup and login process, it is necessary that your TP-Link firmware update is also conducted. For the firmware update given below are the steps you need to take:

  • You need to download the latest version of your firmware from the TP-Link website.
  • Now login to the web management page of your router.
  • Select ‘system tools’ and then click on ‘firmware upgrade’.
  • Open the file which you have downloaded earlier. And press the ‘upgrade’ button.

Once the firmware is upgraded your device will reboot automatically. You can click on ‘status’ to check whether if the firmware is upgraded. Hence, by following the above steps your TP-Link firmware update is completed.

Thus, TP-Link AC2300 Smart Wi-Fi router is easily installed by using the information given in the above blog. We hope that by the given information you will be able to understand the TP-Link AC2300 setup process whereas the TP-Link AC2300 login is very easy to access. For any more information, you can contact us at our toll-free number.  

Can’t access to the internet after successfully connected to TP-Link wireless network

Have you ever been in a situation where your computer is connected to your TP-Link router but you could not browse the internet? The moment is so frustrating and confusing as your device is connected to the TP-Link router but not to the internet. The reasons for this situation could be many. In some cases, this could be due to the change in the operating system settings or your TP-Link router cannot connect to the internet via your Internet Service Provider (ISP).

Problem description:

You are not able to access the Internet after successfully installing the TP-Link router.

Solutions:

Here are some tested options that can fix your problem, can’t access to the internet after successfully connected to TP-Link wireless network.

1. Check the physical connection between your modem and TP-Link router:

 

hardware setup

If you see a message ‘WAN Port is not plugged’ on the status page of your TP-Link router, this means that your modem is NOT plugged into the WAN port of the router properly.  Plug it in and then check if the red message is gone or not.

2. Clone the MAC address of your Computer:

Clone your PC’s MAC address to the TP-Link router by following the below given steps.

  • Check that you are connected to the router with the computer which was originally connected to your cable modem.
  • Log in to the option ‘Management’ and then click Network> MAC Clone on the left side of the web page.
  • Click ‘Clone MAC Address’ to clone your computer’s MAC address to WAN MAC Address of the TP-Link router.

3. Change the LAN IP Address of your TP-Link router:

Most TP-Link routers use the default LAN IP Address i.e. http://192.168.0.1, it may be conflicting with the IP address of your existent router/modem. If your TP-Link router is not able to communicate with your modem then you won’t be able to access the internet. To resolve this issue, you will need to change the LAN IP Address of your TP-Link router.

  • Click the option ‘Network’ and then click LAN in the left side menu. Change the IP address of your router.  Save the changes.

4. Power cycle your router and modem:

Power off your TP-Link router and modem; leave them off for one minute. Power on your TP-Link Router, then your modem. Now, check the Internet access on your computer.

5. Double check your WAN Connection Type:

  • Click the option ‘Network’ then select WAN to configure the correct WAN Connection type. Save the changes you just made.
  • Power cycle the TP-Link router and modem once again and check the internet connection.

These solutions will resolve your issue related to the error, ‘can’t access to the internet after successfully connected to TP-Link wireless network.’ If you have tried all the solutions which are mentioned above but still not able to access the internet by using the TP-Link router you can contact our technical experts at their toll-free number or mail them your query to assist you and resolve your issue.

TP-Link router not detecting WAN

Wide Area Network or WAN is an outlet or plug on a network device which is wired to an external network generally which is an internet connection. Generally, a WAN port is an RJ-45 Ethernet port on a router that is wired to a cable or any modem.

tplink router

The following blog is about when you are unable to detect Wan on your TP-Link router. A WAN or wide area network connects different LANs and can be limited to any organization. In case there is no internet connection when you installed your TP-Link router then there will be no WAN IP address on the router’s status page.

You need to follow the below-given steps to fix the issue of TP-Link router not detecting WAN.

  • You can check the physical connection between the router and modem. In case you see any message flashing as ‘WAN port is unplugged’ on the status page of your router which means the modem is not plugged on into the WAN port of your router. Kindly plug it in properly and check that the message is gone.
  • You can also clone the MAC address of your PC. Because some of the ISP register the MAC address of your computer while you connect to the internet for the first time through the cable modem, in case you use or add any router in your network to share your internet. So, here we need to clone the MAC address of your PC because it will not accept the router’s MAC address.
  • Verify that the TP-Link router with which you were connected earlier with the cable modem is connected to your device. Log into the management page and then click ‘Network’ and then click on the option of ‘MAC clone’ which will be on the left side.
  • Now click on ‘clone MAC address’ which will clone the computer’s MAC address to the WAN MAC address to your router.
  • Mostly the TP-Link router uses http://192.168.1.1 or http://192.168.0.1 as the default IP address which will be contrary with the IP range of your modem and router. If this happens then your router is not able to connect with your modem and also you cannot connect to your internet connection. To fix this problem you need to change the LAN IP address of your router. Click on the ‘network’ option and then the ‘LAN’ option on the left side of the menu. Here you can easily change your IP address to the new one.
  • The next time you need to use the IP address you will use the new IP address to connect to the management page.
  • You can also power cycle your modem and router.  To perform the power cycle follow the steps mentioned as under:
  • Power off your modem and TP-Link router and leave both off for one minute.
  • Now power on your router first.
  • Then power on your modem. You need to wait for 2 minutes.
  • Now wait for another 1 or 2 minutes and then check the internet connection.
  • In case it still did not work then you can double check the WAN connection type.  For this follow the steps as under:
  • In the status menu, click on ‘Network’ and then in the left menu click on ‘WAN’ to connect to correct ‘WAN connection type”.
  • And then ‘save’ to save your changes.
  • Now power cycles your modem and router after saving your changes.

Thus, by pursuing the above-given steps you can easily resolve the issue of TP-Link router not detecting WAN. For further information, you can also call us on our toll-free number.   

Tether app fails to detect TP-Link device on the device page

If you are searching for What should I do if Tether app fails to detect my TP-Link device on the device pagethen this is the right place for you. In this blog, we will tell you how to use the Tether app, how to block or unblock connected devices? What to do if the Tether app fails to detect your TP-Link device?

tether-app

Tether is a great app launched by TP-Link for taking control of your network using your Smartphone and for administering who see what and when on the internet within the household.  It lets you see whose devices are connected to your router. So, it is a wonderful app to know if any stranger is tapping into your router and hogging your wifi.

With the help of the Tether app, you have the power to manage your router, extender, modem anytime and anywhere. Another advantage of Tether app is that it alerts you of any firmware updates to ensure the best and advanced wifi experience of your network.

What can TP-Link Tether app do?

The Tether app can do most of the things that you would need to manage your TP-Link router from your hands.

  • You can view and block devices connected to your router.
  • You can reboot and restart your router
  • You can configure your internet connection, view your SSID and password
  • Parental control- you can block websites for a certain device

How to view and block or unblock connected devices?

Block devices

Once you connect your router to the Tether app, you can see the list of the connected devices to your wifi network. The list consists of icons based on the device name and device type. If you find someone connected without your permission you can simply block them by tapping on the device you wish to block and selecting BLOCK DEVICE. This will block that device from accessing your internet connection.

What should you do if your Tether app fails to detect your TP-Link device on the device page?

If your tether app fails to detect your TP-Link device on the device page, read the following points to troubleshoot the issue.

  1. Make sure that your Smartphone is connected to your TP-Link device wirelessly.
  2. Make sure that your Smartphone is not connected with any guest network.
  3. Make sure that the devices that you want to connect are in the compatibility list and are updated with the latest firmware.
  4. If your TP-Link device is a range extender with static IP, then make sure that the IP Address is in the same subnet as your router.
  5. If you have VPN software on your Smartphone, turn it off.
  6. Reboot the TP-Link device.
  7. Restart the Tether app and try again.

These points will troubleshoot all your issues related to the Tether app if it fails to detect TP-Link devices on the device page.  If you still have any other issue regarding tether app, you can contact our technical team at their toll-free number or send mail them your query. Our experts will try their best to assist you.

Internet Dropping Down

It becomes really annoying when you are in between of your important work call or any specific download and your Internet starts dropping. Nowadays each one of us uses the internet for our important works. And there occurs the problem of Internet dropping down.

Luckily there are some steps you can use to enhance your internet connection performance which is mentioned in the given blog. Follow the step to step guide and you can fix your problem easily.

Use the below-given steps to resolve the issue of your internet dropping down:

  • With the help of power cycle: When the connection you are using starts dropping, the power cycle can resolve these issues very easily. You need to shut down your computer, router or modem. Now, on the power supply in order of the first modem then router and at last your computer. The power button of your modem or router is in the backside.
  • Update the Network adapter software: In case you are having the outdated version of your Network adapter software. You need to update the software and fix the issue. To update the software you need to download the latest driver from the manufacturer site or from the network adapter’s site. Or you can automatically do it with drive easy.driver update
    • Download the drive easy and install it. Drive easy will automatically detect your system and will find the correct drivers.
    • Now, run your driver easy and press the ‘scan now’ button.
    • To automatically download press the ‘update’ button present near to flagged Wi-Fi driver and then you can manually install it.
    • Reboot your computer after updating the adapter software so that it can make the new driver resolve the problems.
  • You can also check your wireless power setting: If the network card is shut down to save the power it will also cause the issue for your internet connection.  To check the setting of your network card, follow the steps given below:
    • Press the window logo key + R key on your keyboard to open the Run box.
    • Now, enter devmgmt.msc in the box and press enter.
    • Search and expand network adapter dialog and right click on your Network card choose ‘properties.’
    • When the window pops up, click on the ‘power management’ tab. Check that ‘Allow the computer to turn off this device to save power’ button is unchecked.  In case it is checked, uncheck it and click on ‘ok’ to save your settings.
    • Driver power tab
  • You can also check for the Wi-Fi radio signals: If you are facing the problem of your Internet dropping down then you need to check for the radio signals your network is getting from the electronic devices placed nearby. In case you cannot switch the signals off you can change the location of your device.
  • Network overload: You need to check that there is no network overload. Like if you and your whole family are connected to the same wireless network. Then there can be problems like your videos stop playing, you have to reload the page. This causes the network overload and the internet connection to starts dropping.  

Thus, above are the tips you can take to help resolve your problem of Internet dropping down.  For further information or you need to talk to us you can call us on our toll- free number.

How Do You Access a Home Router

How do you access a home router as admin? This is the major query that most of the people with wireless router ask. Considering this query, today we will discuss how to access the wireless router as admin. The admin here basically stands for “Administration”. To access the router as admin, means getting into the router and modifying its configurations. You can do this only if you have access to the admin rights of the router. Without any further discussion, let’s jump on to the process of accessing a home router as admin.

How do you access a home router as admin: Process?

As you also have searched for the query “how do you access a home router as admin”, follow the steps given below:

    1. Verify that your computer is connected to the wireless router by either wired or wireless mode. If the connection is wired, make sure the cable used is RJ45 Ethernet cable.
    2. Make sure you know the default IP address of your wireless router because this will help you to get into it. The IP address is usually like 192.168.1.1.
      NOTE: In case you don’t know the IP address of your wireless router, look for the wireless label on the bottom of the router. You will find all the information on your router and its network. Make sure you take a note of the credentials.
    3. Now open a web browser of your choices like Microsoft Edge, Google Chrome, and Mozilla Firefox. After you launch the web browser, enter the default IP address of your wireless router into the address bar.
    4. default IP address
    5. Your browser will now take you to the router’s login page where you will see a small window asking for router administrative username and password.
    6. Enter the administrative username and password into the respective fields. The admin credentials are as follows:
      Username: admin, Password: admin or password
    7. Click on the login tab and the router’s admin console will appear on your screen. The router admin console is basically a single window for all your configurations and settings. If you want to update the router settings, follow the on-screen instructions to do so.

Now you can also answer if someone asks you “how do you access a home router as admin”.

How do you access a home router as admin: Issue?

Some of the routers may not work with above-mentioned instructions. These routers need a dedicated app. The users need to download the app of the manufacturer to get into their router. In case you can’t access the home router as admin, reset the router to the default factory settings and then proceed to access the router.

We hope that this article helped you to get into the home router as admin. If you face an issue while attempting to perform the steps, give us a call on our Toll-Free number and we will guide you in the best possible way.