How do I Secure My Network?

Wireless networking has made it easy for anyone to use internet on mobile, devices, tablets, laptops, computer devices and other wireless devices anywhere in the house without using the cluster of cables. Those days are gone when you just had to install a firewall and your network was saved. Today’s hackers are much more advanced that’s why just installing a firewall is not enough. The hackers can get into your network without setting foot inside your house because the wireless network is much more open. Therefore, it is very important to secure the network of your wifi.

Securing your network is a lot more than just setting a password. The enhanced security measures can go a long way to secure the network. It is not very hard to secure the network that can prevent hackers from taking control of your computer and also prevents others from stealing your network. Here are some few easy measures which you should adopt in order to secure your wireless network.

Access the settings page of your router

setting-page

It is very important for you to know how to access the settings of your wireless router. Normally, you just have to type 192.168.1.1 into the address bar of your web browser and then enter the default username and password of your router.

Note: You can find the credentials of your routers by searching it on Google in case you have lost the printed manual that came with your router.

Unique password for your router

The first thing you should do once you are logged in to your router is to change the default password of your wireless router to something more secure and advanced. To change the password, you have to do it from the administrative setting of your router’s settings page.

Use an unsuspicious network SSID name:

The wireless network name (SSID) of the router is usually ‘default’ or the brand name of the router. Changing the network name will obviously make your network more secure. To change the network name, you have to go to the wireless settings.

Encrypt using WPA2:

The network encryption is also used to secure the network. The several encryption methods are WEP, WPA and WPA2. Choose WPA2 as it is the strongest encryption. Open the wireless security settings and enable the encryption on your wireless network.

Filter MAC address:

Add the MAC addresses of all the devices you want to be connected with your wireless router so that only specific devices can connect to your wifi network. Add the MAC address of your devices and add them to MAC address filtering in the router’s administrating settings.

The Range of your wireless signal:

You can reduce the range of your network by changing the mode to 802.11g instead of 802.11n or use a different wireless channel.

Latest router’s firmware:

To secure the network of your wireless router it is very important to upgrade its firmware. Check the website of your router’s manufacturer for firmware updates of your router.

There are many other security options that can secure the network but these measures are easy to implement and won’t cost much in terms of your money and time. By adopting these measures you will have big security payoffs and will be able to sleep better at night. If you face any issues while adopting these measures in order to secure your network then you can contact our team of technical experts. You can call them on the toll-free number which is accessible 24*7 or you can also mail them your query related to your router.

Connections drop at random times

As you have searched for the keyword “Connection drop at random times” so we are going to teach you some troubleshooting tips that should get your Internet connection back and running because we all know how irritating it can be if your wifi keeps dropping.With all the physical barriers such as architectural interference, metal appliances etc. may affect the strength of the wireless signal and create a bad impact on the existing wifi network. There often seems to be no reason behind the weak internet connection randomly drops for a few seconds. However, there could be several possible reasons why your wifi Connection drop at random times. If your internet connection keeps dropping and reconnecting, you are not alone. Intermittent wifi connection is frustrating, but it’s usually possible to fix the issue.

Here are some steps that you can try to get your internet connection stable again. Just go through the complete list until your problem is resolved.

  1. Insufficient Wi-Fi Network Range:

You might be suffering from an intermittent wifi connection if your router is placed in a closet, stuck in the corner of your basement, simply old or broken. If your router is placed far away then you’ll notice the Wi-Fi Connection drop at random times. One of the great solutions is moving closer to the router or moving the router closer to you. If still, your Wi-Fi is not stable then restart your router and see the status of the Internet. Another option to improve the wifi network range is wifi range extender. Click the link https://www.wicommfi.com/ to get more information about the Wireless Range Extender.

  1. Radio Signal Interference:

If you notice that your internet connection keeps dropping and reconnecting when you are right next to the microwave or another electronic device then chances are that your router’s wifi signals might be interfering with the radio signals transmitted by various consumer electronic products. You can change some Wi-Fi radio settings to avoid this problem.

  1. The Network congestion:

The most common causes for the error “Connection drop at random times” are a number of networks that are using the same channel. When multiple networks overlap, it can slow down the performance of wifi connection adversely and the Internet connection randomly drops for a few seconds. However, you can solve the “wifi keeps dropping” problem by manually switching to a less crowded channel or one that is not used by any other networks currently.

  1. Outdated Firmware or Missing Driver:

Another reason for the intermittent wifi connection is your wireless router and network card. The wifi router and computer’s network driver become corrupted or obsolete over time and cause network drops and other wireless problems. You should update the firmware of your router if you are using an old router. Also, consider updating your computer’s network driver.

  1. Reinstall the software or Reset Wireless Router:

If the problem still persists then reset your router by inserting a pin in a little hole at the back of the wifi router and hold it down for about 10-20 seconds. After resetting your wifi router, restart your PC and modem and try to connect to the wifi. If you are confident that the problem is not with the hardware or your ISP but with the software then you should try to reinstall or upgrade the software of your PC.

We hope after reading this article you would no longer wonder why your wifi Connection drop at random times. Using these few steps you can resolve all your wifi issues. If you are still facing issues, you can call our experts who have years of experience and resolve your issues fast. Simply call us at our toll-free number or chat live with us.

Can’t access to the internet after successfully connected to TP-Link wireless network

Have you ever been in a situation where your computer is connected to your TP-Link router but you could not browse the internet? The moment is so frustrating and confusing as your device is connected to the TP-Link router but not to the internet. The reasons for this situation could be many. In some cases, this could be due to the change in the operating system settings or your TP-Link router cannot connect to the internet via your Internet Service Provider (ISP).

Problem description:

You are not able to access the Internet after successfully installing the TP-Link router.

Solutions:

Here are some tested options that can fix your problem, can’t access to the internet after successfully connected to TP-Link wireless network.

1. Check the physical connection between your modem and TP-Link router:

 

hardware setup

If you see a message ‘WAN Port is not plugged’ on the status page of your TP-Link router, this means that your modem is NOT plugged into the WAN port of the router properly.  Plug it in and then check if the red message is gone or not.

2. Clone the MAC address of your Computer:

Clone your PC’s MAC address to the TP-Link router by following the below given steps.

  • Check that you are connected to the router with the computer which was originally connected to your cable modem.
  • Log in to the option ‘Management’ and then click Network> MAC Clone on the left side of the web page.
  • Click ‘Clone MAC Address’ to clone your computer’s MAC address to WAN MAC Address of the TP-Link router.

3. Change the LAN IP Address of your TP-Link router:

Most TP-Link routers use the default LAN IP Address i.e. http://192.168.0.1, it may be conflicting with the IP address of your existent router/modem. If your TP-Link router is not able to communicate with your modem then you won’t be able to access the internet. To resolve this issue, you will need to change the LAN IP Address of your TP-Link router.

  • Click the option ‘Network’ and then click LAN in the left side menu. Change the IP address of your router.  Save the changes.

4. Power cycle your router and modem:

Power off your TP-Link router and modem; leave them off for one minute. Power on your TP-Link Router, then your modem. Now, check the Internet access on your computer.

5. Double check your WAN Connection Type:

  • Click the option ‘Network’ then select WAN to configure the correct WAN Connection type. Save the changes you just made.
  • Power cycle the TP-Link router and modem once again and check the internet connection.

These solutions will resolve your issue related to the error, ‘can’t access to the internet after successfully connected to TP-Link wireless network.’ If you have tried all the solutions which are mentioned above but still not able to access the internet by using the TP-Link router you can contact our technical experts at their toll-free number or mail them your query to assist you and resolve your issue.

Internet Dropping Down

It becomes really annoying when you are in between of your important work call or any specific download and your Internet starts dropping. Nowadays each one of us uses the internet for our important works. And there occurs the problem of Internet dropping down.

Luckily there are some steps you can use to enhance your internet connection performance which is mentioned in the given blog. Follow the step to step guide and you can fix your problem easily.

Use the below-given steps to resolve the issue of your internet dropping down:

  • With the help of power cycle: When the connection you are using starts dropping, the power cycle can resolve these issues very easily. You need to shut down your computer, router or modem. Now, on the power supply in order of the first modem then router and at last your computer. The power button of your modem or router is in the backside.
  • Update the Network adapter software: In case you are having the outdated version of your Network adapter software. You need to update the software and fix the issue. To update the software you need to download the latest driver from the manufacturer site or from the network adapter’s site. Or you can automatically do it with drive easy.driver update
    • Download the drive easy and install it. Drive easy will automatically detect your system and will find the correct drivers.
    • Now, run your driver easy and press the ‘scan now’ button.
    • To automatically download press the ‘update’ button present near to flagged Wi-Fi driver and then you can manually install it.
    • Reboot your computer after updating the adapter software so that it can make the new driver resolve the problems.
  • You can also check your wireless power setting: If the network card is shut down to save the power it will also cause the issue for your internet connection.  To check the setting of your network card, follow the steps given below:
    • Press the window logo key + R key on your keyboard to open the Run box.
    • Now, enter devmgmt.msc in the box and press enter.
    • Search and expand network adapter dialog and right click on your Network card choose ‘properties.’
    • When the window pops up, click on the ‘power management’ tab. Check that ‘Allow the computer to turn off this device to save power’ button is unchecked.  In case it is checked, uncheck it and click on ‘ok’ to save your settings.
    • Driver power tab
  • You can also check for the Wi-Fi radio signals: If you are facing the problem of your Internet dropping down then you need to check for the radio signals your network is getting from the electronic devices placed nearby. In case you cannot switch the signals off you can change the location of your device.
  • Network overload: You need to check that there is no network overload. Like if you and your whole family are connected to the same wireless network. Then there can be problems like your videos stop playing, you have to reload the page. This causes the network overload and the internet connection to starts dropping.  

Thus, above are the tips you can take to help resolve your problem of Internet dropping down.  For further information or you need to talk to us you can call us on our toll- free number.

How Do You Access a Home Router

How do you access a home router as admin? This is the major query that most of the people with wireless router ask. Considering this query, today we will discuss how to access the wireless router as admin. The admin here basically stands for “Administration”. To access the router as admin, means getting into the router and modifying its configurations. You can do this only if you have access to the admin rights of the router. Without any further discussion, let’s jump on to the process of accessing a home router as admin.

How do you access a home router as admin: Process?

As you also have searched for the query “how do you access a home router as admin”, follow the steps given below:

    1. Verify that your computer is connected to the wireless router by either wired or wireless mode. If the connection is wired, make sure the cable used is RJ45 Ethernet cable.
    2. Make sure you know the default IP address of your wireless router because this will help you to get into it. The IP address is usually like 192.168.1.1.
      NOTE: In case you don’t know the IP address of your wireless router, look for the wireless label on the bottom of the router. You will find all the information on your router and its network. Make sure you take a note of the credentials.
    3. Now open a web browser of your choices like Microsoft Edge, Google Chrome, and Mozilla Firefox. After you launch the web browser, enter the default IP address of your wireless router into the address bar.
    4. default IP address
    5. Your browser will now take you to the router’s login page where you will see a small window asking for router administrative username and password.
    6. Enter the administrative username and password into the respective fields. The admin credentials are as follows:
      Username: admin, Password: admin or password
    7. Click on the login tab and the router’s admin console will appear on your screen. The router admin console is basically a single window for all your configurations and settings. If you want to update the router settings, follow the on-screen instructions to do so.

Now you can also answer if someone asks you “how do you access a home router as admin”.

How do you access a home router as admin: Issue?

Some of the routers may not work with above-mentioned instructions. These routers need a dedicated app. The users need to download the app of the manufacturer to get into their router. In case you can’t access the home router as admin, reset the router to the default factory settings and then proceed to access the router.

We hope that this article helped you to get into the home router as admin. If you face an issue while attempting to perform the steps, give us a call on our Toll-Free number and we will guide you in the best possible way.

TP-Link Pushing IP address to modem default

There can be many reasons that your TP-Link is pushing IP address to modem default. This means that you need to change the IP address of your TP-Link router.

TP-Link routers are a wired or wireless network, which with its excellent speed makes your browsing better. TP-Link routers are very easy connecting but sometimes there are some problems which affect the setup process or the installation.  

The following blog helps you in changing the default IP address of your router. You need to follow the steps mentioned below to change the default IP address.  

  • In your web browser, enter http://192.168.1.1 or http://192.168.0.1 or http://tplinkwifi.net.
  • You will be directed to the login page. Fill the login credentials i.e. username and password which is an admin for both.
  • In the menu located on the left side, select “Network” and then “LAN”.
  • Now you can change the IP address as you want it to be.
  • Click on ‘save’ to save your changes.

When the IP address is changed you need to log in with the new IP address to log into the router.

Thus, by changing the default IP address we hope that the issue of TP-Link pushing IP address to modem default is fixed.  However, there are some frequently asked questions regarding TP-Link IP address. Some of the frequently asked questions are mentioned below.

Q. How can I change the administrative username or password of my TP-Link ADSL router?

Ans. To change the admin username and password of your TP-Link router, follow the steps given below:

  • On your device, open any web browser and fill LAN IP address of the ADSL router and press enter. The default IP address is http://192.168.1.1
  • When on the username and password field. Enter the default username and password i.e. admin for both in lowercase.
  • Under the system tools click on “Manage control”.
  • Now fill the old password and then the new password and new username twice.
  • At last click on ‘save’ to apply your changes.

    change password

When you will change the password login to your ADSL router with the new password.

Q. How can I find the wireless password on TP-Link devices?

Ans.   To find the wireless password first you need to:

  • Log into your TP-Link router. Then,
  • Under the ‘wireless’ option visit ‘wireless security’ page. Now select WPA-PSK/WPA2-PSK, enter your own Wi-Fi password in the PSK box.
  • Click on ‘save’ to save your changes. And reboot the router.tplink-router security

Q. How can I log into the web-based utility (Management page) of the TP-Link wireless router?

Ans. The Web-based management page of TP-Link router is a built-in web server which does not require an internet connection. The web-based page requires your device to be only connected to your TP-Link router. To log into the web-based utility page you need to follow the steps mentioned below:

  • First, choose your connection type (wired or wireless).
    1. In case using for a wireless connection, connect to your TP-Link wireless network. Now, find the wireless network from the list of Wi-Fi list on your device and connect to the wireless password.
    2. In case of ‘wired connection, connect your Ethernet cable to one of the LAN ports on the back of TP-Link router.
  • Now open any web interface and enter http://tplinkwifi.net in the URL bar.
  • Now, fill the default username and password in the login page. If you have changed the username and password then enters your password or username otherwise you can fill the default username and password which is an admin for both.

Now you are logged into the web-based utility of TP-Link router.

Thus, from the following blog you can easily access to TP-Link router IP address, easily change admin username and password and can fix the issue to log into the web based page. In case you find any problem you can call us at our toll-free number.

How to Set up any new Wireless Router?

More and more devices are now able to connect to the wireless networks. Therefore, setting up a wireless router has become a crucial part. Setting up a wireless network allow devices to connect to the internet from anywhere in the home.  Want to setup any wireless router, but no idea where to start? The assortment of ports, cables and other components in any router leaves most people scratching their heads. The easiest thing to do in most of the cases is to follow the instructions that come with the device.  But in case you cannot understand the instructions or cannot find them, then these general steps should help. These steps apply to most of the wireless router. Set up any wireless router with these easy and simple steps in a few minutes.

 tplink router

Before jumping to the steps, let’s see what are the things required to set up any wireless router:

The following things are required to set up any wireless router

  • A Wireless router
  • A Computer or a laptop
  • Cable, fiber
  • An Ethernet cable
  • A Modem

Step 1: Connecting the hardware

Firstly, plug one end of the Ethernet cable into your modem and the other-end of the cable into your router’s WAN port. Now, plug one-end of another Ethernet cable into the LAN of your wireless router and other end to your laptop. Plug your router’s power adapter into the wall.

Step 2: Find the configuration page of your wireless router

It is a website hosted on the router to configure the router’s settings. In most of the cases, you can find the configuration page on the browser by typing the IP Address 198. 162. 1. 1. Press Enter.

Step 3: Enter the username and password

In most of the cases, you will be asked to enter the default username and password. The default username and password are usually on the sticker of the router. Enter the default username and password and you will get the access to the admin panel. You are now ready to configure your wireless router.

Step 4: Set up your wireless network

Click on the option called ‘Wireless’ and then on a box labeled as ‘SSID.’ This option allows you to choose a name for your wireless network. Enter a unique name for your wireless network

Step 6: Security Settings

tplink-router security

You need to set up the security settings now. Use WPA2 security to protect your network from hackers. Make sure you choose a strong password and afterward store it somewhere secure.

And you’re off

With all these steps, your wireless router should be now ready to use. Now, Go ahead and connect all your devices and enjoy.

If you face any issue with your wireless router, simply reset your router to default settings by pressing the button on the router for about ten seconds with some sharp object. This will troubleshoot almost all of your problems related to the wireless router.

And in case you still have any concern or issue or there is something which was unclear to you, feel free to call our technical team at our toll-free number or simply mail them at.